2585293 - 1028H60 piston, pin set - replace

1. Remove the piston rings.2. Release the pin (2a) and separate the connecting rods (2b) from the pistons (2c). 1. Remove the piston rings (1a) from the pistons using the tool (1b).

	Description	Code
1b	Extractor/Fitting tool	1.860.183.000

Check the alignment of the connecting rods using suitable equipment; if it is not correct, replace the connecting rod.Check that the weight difference between the pistons corresponds to the recommended figures.

The arrows in the diagram illustrate where material can be removed from the to equalize the weight.

	Measurement		Value
-	Weight difference between pistons (g.)		5

Check that the weight difference between the connecting rods, complete with half-bearings, caps and bolts corresponds to the recommended figures.

The arrows in the diagram illustrate where material can be removed from the to equalize the weight.

	Measurement		Value
-	Difference in weight between connecting rods (g.)