2585279 - 1004D40 engine - position on stand and remove

Rest the engine on a workbench.Adjust the automatic belt tensioner using the tool to slacken the auxililary drivebelt.1. Remove the single engine components drive belt (1).
1. Undo the bolts (1a) and remove the alternator (1b) after having disconnected the electrical connections.2. Undo the bolts (2a) and remove the alternator rear mounting bracket (2b).3. Undo the fixing bolts (3a) and detach the oil dipstick introduction pipe (3b).
1. Undo the bolts (1a) and remove the air conditioner compressor (1b).2. Undo the bolts (2a) and remove the air conditioning compressor mounting (2b).
1. Loosen the bands (1a) and the connector (1b) and detach the coolant pipes (1c).
1. Fit the tool for supporting the engine on the overhaul stand, front engine side.
DescriptionCode
1Brackets1.861.001.039
1. Fit the tool for supporting the engine on the overhaul stand, rear engine side.
DescriptionCode
1Brackets1.861.001.039
Secure and support the engine using a hydraulic hoist fitted with chains.Fit the engine on the overhaul stand.Release the engine from the hoist.Drain the engine oil from the plug on the oil sump.