4CarData
eLearn
Контакты
English
Da 10/2000
da 12/03
Fino a 10/2000
FIAT
DOBLO
1.9 DIESEL
TEST
10 ENGINE
1088 ENGINE COOLING
1088D COOLANT PIPES AND HOSES
1088D14 UPPER SLEEVE FOR COOLANT INLET TO RADIATOR - R + R
2584311 - 1088D14 upper sleeve for coolant inlet to radiator - r + r
Removing
(
Refitting
)
Op. 5530B10 BATTERY - R+R
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.
Position a suitable container to collect the coolant.
1. Disconnect the sleeve from the radiator and thermostat and recover the water in the container.
2. Remove the upper engine coolant hose.
Refitting
(
Removing
)
Check the condition of the pipe.
Connect the flexible pipe to the radiator and to the thermostat.
There is a notch on the flexible pipe that should be matched with the projection on the rigid section of the thermostat pipe.
Fasten the pipe using new bands.
Op. 1048A10 AIR FILTER ASSEMBLY - R.R.
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.
Op. 5530B10 BATTERY - R+R
Op. 0010T20 ENGINE COOLANT - CHANGE
Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.