2585069 - 7020D42 sliding door lock striker - r+r
Removing
(
Refitting
)
1. Undo the bolts (1a) and remove the striker (1b).
Refitting
(
Removing
)
Fit the striker and loosely tighten the fixing bolts.Check, by closing the door, that the door lock and striker are properly aligned.If they are not, adjust the position of the striker, using the slotted holes for securing the bolts.Tighten the striker bolts to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | SLIDING DOOR LOCK STRIKER | M8 | 2.4 |