2585114 - 7030F34 support beam (rear) of flap on load compartment roof - r+r

Removing ( Refitting ) 1. Undo the bolts (1a) and remove the trim (1b). 1. Undo the fixing bolts (1a), rotate the lever (1b) and remove the crossmember (1c), releasing it from the support (1d).

Support the crossmember.

Refitting ( Removing ) 1. Position the crossmember and tighten the fixing bolts to torque.2. Loosen the bolt to allow the adjustment of position of the crossmember.3. Proceed with the adjustment, checking that the pin (3a) on the crossmember and the opening in the bracket (3b) are perfectly aligned. 1. When the adjustment is completed, tighten the fixing bolt. Fit the embellishment and secure it with its screws.