223000134 - 1080B40 CATALYTIC PRE-CONVERTER - R.R.
Removing
(
Refitting
)
Position the vehicle on a lift.Proceed with the removal 1016A10 COPERCHIO INSONORIZZANTE - S.R..Proceed with the removal Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD R+R.Proceed with the removal Op. 5530B10 BATTERY - R+R.Proceed with the removal Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R..Proceed with the removal Op. 1048A10 AIR FILTER ASSEMBLY - R.R..Proceed with the removal Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Proceed with the removal 1076B70 TUBAZIONE di scarico tra PRECATILIZZATORE e CATALIZZATORE - S.R..Proceed with the removal Op. 1048B14 AIR SUPPLY HOSE BETWEEN TURBOCHARGER AND HEAT EXCHANGER - REPLACE.Proceed with the removal Op. 1084B42 ENGINE OIL RETURN PIPE FROM TURBO - R + R.Proceed with the removal 1064A19 GRUPPO TURBOCOMPRESSORE - COLLETTORE di SCARICO - MANICOTTO di UNIONE a TUBAZIONI SCARICO - S.R..Place the turbocharger assembly in the vice.1. Undo the nuts (1a) and remove the catalytic preconverter (1b).
Refitting
(
Removing
)
1. Place the catalytic conveter (1a) in its housing and fasten it tightening the nuts (1b) to the recommended torque.| Fastening | Component | dia | Value(daNm) | |
|---|---|---|---|---|
| 1b | Nut | CATALYTIC PRE-CONVERTER | M10 | (Turbocharger side) 2.0 - 3.0 |
