2584121 - 0010T12 engine oil and filter replace

The oil should be changed with the engine hot to facilitate the drainage of the used oil.

The engine oil is harmful to skin: keep contact with skin to a minimum and if there is contact wash with soap and water.

The oil should be changed with the engine hot to facilitate the drainage of the used oil.

Position the vehicle on a lift.1. Remove the filler cap. 1. Withdraw the engine oil dipstick. Proceed with the removal    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..1. Undo the drain plug in the crankcase sump and leave the oil to drain into a suitable container.

Be very careful when removing the drain plug, the oil could be very hot.

Do not let the oil disperse into the atmosphere as this could cause pollution.

1. Remove the engine oil filter using a suitable tool. Clean the drain plug and tighten the gasket to the recommended torque.

	Fastening	Component	dia	Value(daNm)
-	Plug	ENGINE OIL DRAIN PLUG	M18	(Crankcase sump side) 1.8 - 2.2

Lubricate the new oil filter seal with engine oil and tighten it fully by hand.Proceed with the refitting    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Refill the engine lubrication circuit with the recommended oil.

	Type	Component	Description	Qty.
-	Oil [l]	ENGINE LUBRICATION SYSTEM	SELENIA TURBODIESEL	4.3

The table shows the quantity for periodic replacement.

For the optimum operation of the engine in particularly harsh climate conditions (temperatures below -15C) use the recommended oil for the engine lubrication circuit.

	Type	Component	Description	Qty.
-	Oil [l]	ENGINE LUBRICATION SYSTEM	SELENIA WR DIESEL	4.3

The table shows the quantity for periodic replacement.

During the engine oil refilling operations, take great care to avoid letting the oil accidentally drop into the alternator ventilation slits which would damage it and create a fire risk.

Check and, if necessary, top up the engine oil level.    Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP.Remove the vehicle from the lift.