2584266 - 1076B18 rigid section of exhaust pipe between catalytic converter and silencer - r + r
Removing
(
Refitting
)
Position the vehicle on a lift. Op. 1076B20 REAR EXHAUST SILENCER - R + R Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.1. Undo the nuts fixing the middle section of the pipe to the exhaust manifold.2. Remove the bearings (2a) from the rubber mountings on the bodyshell, then remove the rigid exhaust pipe (2b).
Refitting
(
Removing
)
Position the rigid exhaust pipe and fit the bearings for the rigid pipe in the special rubber mountings.Tighten the nuts fixing the middle section of the pipe to the exhaust pipe to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | CATALYTIC CONVERTER (ONE) | M8 | (Flange connecting intermediate exhaust. pipe) 3 |