2584287 - 1084A42 engine oil pressure warning light switch - r + r

Removing ( Refitting ) Position the vehicle on the lift.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Disconnect the negative battery terminal.Raise the lift.1. Disconnect the electrical connector for the oil pressure switch.

	Description	Connector
1	Insufficient engine oil pressure sensor (switch)	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

2. Undo and remove the engine oil pressure switch. Refitting ( Removing ) Tighten the oil pressure switch to torque.

	Fastening	Component	dia	Value(daNm)
-	Switch	INSUFFICIENT ENGINE OIL PRESSURE SWITCH	M14	3.2

Connect the electrical connector for the oil pressure switch.

	Description	Connector
-	Insufficient engine oil pressure sensor (switch)	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Lower the lift.Connect the negative battery terminal.Remove the vehicle from the lift.