2584686 - 3340A34 rpm sensor (one) of one l/h or r/h rear wheel - r+r

Removing ( Refitting ) Place the car on a lift.Disconnect the battery negative terminal lead.    Op. 7040L44 REAR DOOR HOUSING RUNNING BOARD (ONE), LEFT OR RIGHT - R.R..    Op. 7040L62 RUNNING BOARD SUPPORT FOR (ONE) REAR DOOR HOUSING, LEFT OR RIGHT - R.R..1. Slightly raise the rear floor trim and disconnect electrical connection (1a) of the ABS wheel sensor, then pass the wiring through hole (1b) on the body.
NameConnector
1Left rear wheel sensor for ABS    See K75 LEFT REAR WHEEL SENSOR FOR ABS ( FRONT )
NameConnector
1Right rear wheel sensor for ABS    See K76 RIGHT REAR WHEEL SENSOR FOR ABS ( FRONT )
2. Working from the lower side of the car, unscrew the rear rpm sensor bolt.3. Release the wiring from the retaining bracket on the body and remove the rear rpm sensor.
Refitting ( Removing ) Fit the wheel rpm sensor, positioning the wiring correctly on the bracket.Pass the wiring inside the car and connect the electrical connector.

NameConnector
-Left rear wheel sensor for ABS    See K75 LEFT REAR WHEEL SENSOR FOR ABS ( FRONT )

NameConnector
-Right rear wheel sensor for ABS    See K76 RIGHT REAR WHEEL SENSOR FOR ABS ( FRONT )
Screw in the rpm sensor bolt.

FasteningComponentØValue(daNm)
-BoltABS REAR WHEEL RPM SENSORM60.7
Reslace the rear floor covering.    Op. 7040L62 RUNNING BOARD SUPPORT FOR (ONE) REAR DOOR HOUSING, LEFT OR RIGHT - R.R..    Op. 7040L44 REAR DOOR HOUSING RUNNING BOARD (ONE), LEFT OR RIGHT - R.R..Connect the battery negative terminal lead.Remove the car from the lift.