2584768 - 4450A90 rear wheel alignment - check using optical equipment

The rear wheel alignment should be checked after the components which affect the wheel geometry have been subjected to the following checks:tyre inflation pressure;the eccentricity and the orthogonality of the wheel rims should not exceed 3 mm;wheel bearing end float;Carry out the preliminary checks on the vehicle and remove any loads transported.Position the vehicle (in running order) on the lift with test equipment.

Check the alignment of the rear wheels.The rear suspension consists of a rigid axle and two leaf springs at right angles to the actual axle, therefore the wheel alignment cannot be altered. If the rear wheels are not aligned, check the axle and the bodyshell.