2584921 - 5530A14 alternator - r+r for versions with air conditioner

Removing ( Refitting ) Disconnect the negative battery terminal.    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND RECHARGE    Op. 1092B68 BELT FROM A/C COMPRESSOR TO ALTERNATOR DRIVE - R + R1. Unscrew bolt (1a) securing the junction between rigid section (1b) and flexible section (1d) of the air conditioning high pressure pipe and move the flexible section aside.
1. Pass a suitable wrench through the back of the air filter casing and unscrew bolt (1a) securing the alternator bracket (1b).2. Unscrew the bolts loosened previously to remove the belt.
1. Undo the fixing nuts (1a) and disconnect the alternator leads (1b).
DescriptionConnector
1bAlternator    See A010 ALTERNATOR
2. Remove the alternator assembly.
Refitting ( Removing ) Fit the alternator in its seat and connect the electrical wiring, securing with the nut.
DescriptionConnector
-Alternator    See A010 ALTERNATOR
FasteningComponentdia  Value(daNm)
-NutALTERNATOR ECU LEAD/SM8(Lead B+) 2.4
Screw in the alternator bolts and fit the drive belt to the alternator pulley.Tighten the bolt fixing the alternator reinforcement bracket.Connect the flexible section and the flexible section of the air conditioning system high pressure pipe by tightening the bolt securing the joint between them.    Op. 1092B68 BELT FROM A/C COMPRESSOR TO ALTERNATOR DRIVE - R + R    Op. 1092B70 BELT FROM AIR CONDITIONER COMPRESSOR TO ALTERNATOR DRIVE - ADJUST TENSION    Op. 0010T84 COOLANT FOR AIR CONDITIONING SYSTEM - DEHYDRATE AND RECHARGEConnect the negative battery terminal.