223000047 - INSPECTION AND TESTING OF METHANE CYLINDERS

The methane cylinders should be inspected and tested every 5 years.The inspection and test should be under the auspices of and paid for by ENI - Gestione Fondo Bombole Metano [Methane Cylinders Management Body] (except for the operations on the vehicle of dismantling and refitting the cylinders) organized in Italy through authorised cylinder collection centres.After the test has been carried out, ENI-GFBM will issue a special plate with the new expiry date for each cylinder. The methane cylinders should be inspected and tested every 5 years.The inspection and test should be under the auspices of and paid for by ENI - Gestione Fondo Bombole Metano [Methane Cylinders Management Body] (except for the operations on the vehicle of dismantling and refitting the cylinders) organized in Italy through authorised cylinder collection centres.After the test has been carried out, ENI-GFBM will issue a special plate with the new expiry date for each cylinder.

Description	Thousands of kilometres
	20	40	60	80	100	120	140	160	180
Check condition and wear of tyres and adjust pressure, if necessary	+	+	+	+	+	+	+	+	+
Check operation of lighting system (headlamps, direction indicators, hazard warning lights, load carrying compartment, passenger compartment, glove compartment, instrument panel warning lights, etc.)	+	+	+	+	+	+	+	+	+
Check operation of windscreen wash/wipe system, jet adjustment.	+	+	+	+	+	+	+	+	+
Check positioning/wear of front/rear wipers	+	+	+	+	+	+	+	+	+
Check operation of front brake pad wear indicator	+	+	+	+	+	+	+	+	+
Check condition and wear of rear drum brake linings			+			+			+
Visual check on condition of: bodywork exterior and underbody protection, pipes (exhaust - fuel system - brakes), rubber components (dust excluders, hoses, bushes, etc.) brake and fuel system hoses	+	+	+	+	+	+	+	+	+
Check tension of various drivebelts and adjust if necessary (not engines fitted with automatic tensioners)	+
Visually inspect condition of accessory drive belts		+		+		+		+
Check/adjust tappet clearance (Diesel version)	+	+		+		+		+
Check/adjust tappet clearance (1.2 8V version)		+		+		+		+
Check handbrake lever setting		+		+		+		+
Check exhaust emissions/fumes (diesel versions)		+		+		+		+
Check efficiency of evaporation control system				+				+
Replace fuel filter (1.9D versions)		+		+		+		+
Replace fuel filter (1.9 JTD version)	+	+	+	+	+	+	+	+	+
Replace green fuel filter (1.3 JTD version)			+			+			+
Replace air cleaner cartridge (petrol engines)		+		+		+		+
Replace air filter cartridge (diesel versions) (every 30,000 km for 1.3 JTD versions)	+	+	+	+	+	+	+	+	+
Top up fluid levels (engine coolant, brakes, windscreen washer, battery, etc.)	+	+	+	+	+	+	+	+	+
Check condition of timing belt (excluding 1.3 JTD version)			+						+
Replace timing belt (*) (excluding 1.3 JTD version)						+
Replace spark plugs (petrol versions)		+		+		+		+
Check efficiency of engine management systems (via tester connection)		+		+		+		+
Check manual gearbox oil level				+				+
Change engine oil (every 10,000 km for 1.9 D version) (every 30,000 km for 1.3 JTD versions)	+	+	+	+	+	+	+	+	+
Replace engine oil filter (every 10,000 km for 1.9 D version) (every 30,000 km for 1.3 JTD versions)	+	+	+	+	+	+	+	+	+
Replace brake fluid (or every 24 months)			+			+			+
Check pollen filter (or every 12 months)	+	+	+	+	+	+	+	+	+
Check cylinder compression when cold (bipower version)	+	+	+	+	+	+	+	+	+
Visually inspect the condition of: methane pipes and connectors, methane canister fixing, top up, if necessary (***)	+	+	+	+	+	+	+	+	+
Check pressure regulator and replace internal filter, if necessary (***) (bipower version)	+	+	+	+	+	+	+	+	+
Check operation of fuel supply system parameters (using diagnostic socket (bipower version)	+	+	+	+	+	+	+	+	+
Check correct fitting of injectors (positioning, spring retention) (bipower version)	+	+	+	+	+	+	+	+	+
Check and if necessary adjust mechanical tappet clearances (bipower version)	+	+	+	+	+	+	+	+	+

(**) Or every 3 years for heavy usage (cold climates, town driving with long idling stops, dusty areas).Or every 5 years, irrespective of the mileage.(**) Every 12 months in the case of lower mileage.