2584176 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting ) Position the vehicle on a lift.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R    Op. 4450B04 RIGHT FRONT WHEEL - R.R.    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED1. Release and remove the oil seal from the front crankshaft cover.
The oil seal removal operation is destructive so it must always be replaced.
Refitting ( Removing ) 1. Use the special fitting tool and fit the new oil seal to the front crankshaft cover.
DescriptionCode
1Fitting tool1.860.990.000
    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED    Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R    Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT    Op. 1092A10 CRANKSHAFT PULLEY - R + R    Op. 1092B60 ALTERNATOR DRIVE BELT - R + R    Op. 4450B04 RIGHT FRONT WHEEL - R.R.    Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Remove the vehicle from the lift.