2584222 - 1040A31 fuel filler pipe - rigid section - r r

Removing ( Refitting ) Disconnect the battery negative terminal.Place the car on a ramp.Raise the vehicle.    Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.1. Unscrew the retaining bolts2. Remove the pipe protection bracket 1. Undo the bolts fixing the fuel filler pipe fitting to the bodyshell.2. Undo the two bolts fixing the filler pipe to the bodyshell.3. Disconnect the antievaporation pipes (3b) from the rapid connectors (3a)4. Open the band (4a) and disconnect the rigid section of the fuel filler pipe (4b) and the reflux pipe (4c).Release the anti-evaporation pipes from the plastic retaining bands.5. Remove the rigid section of the fuel filler pipe. Refitting ( Removing ) Position the rigid section of the fuel filler pipe.Connect the rigid section of the fuel filler pipe to the reflux pipe using new bands.Connect the anti-evaporation pipes to the rapid connectors.Tighten the bolts fixing the filler pipe to the bodyshell.Tighten bolts fixing the fuel filler to the bodyshell.Fit the pipe protection bracket and tighten the fixing bolts.    Op. 7055B43 REAR WHEEL ARCH LINER (ONE) LEFT OR RIGHT - R.R.Lower the vehicle.Remove the vehicle from the ramp.Connect the battery negative terminal.