1040A74 INERTIA SWITCH FOR ELECTRIC PUMP SUPPLY CIRCUIT R + R - Fiat - DOBLO - eLearn

2584228 - 1040A74 inertia switch for electric pump supply circuit r + r

) With the ignition key in the OFF position, disconnect the battery negative terminal.1. Unscrew the retaining bolts.2. Remove the front running board.

1. Disconnect the electrical connection from the insertia switch.2. Unscrew retaining bolts (2a) and remove inertia switch (2b).

	Name	Connector
1	Inertia switch	See I50 INERTIA SWITCH ( REAR )

Refitting ( Removing

) Connect the electrical connection to the inertia switch.

	Name	Connector
-	Inertia switch	See I50 INERTIA SWITCH ( REAR )

Tighten the bolts fixing the switch to the bodyshell.Fit the front running board and tighten the fixing bolts.With the ignition key in off position, connect the battery negative terminal.