2180A36 MILOMETER CONTROL SENSOR ON GEARBOX - R + R - Fiat - DOBLO - eLearn

2584603 - 2180A36 milometer control sensor on gearbox - r + r

) Place the car on a ramp.Disconnect the battery negative terminal.Raise the car. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.1. Disconnect the electrical connection (1a), and unscrew and remove the speedometer gear sensor (1b) from its seating on the gearbox.

	Name	Connector
1a	Speedometer sensor	See K84 SPEEDOMETER SENSOR ( ENGINE )

Refitting ( Removing

) Fit the speedometer sensor on the gearbox.Tighten to torque the ring nut securing the speedometer gear sensor.

	Fastening	Component	Ø	Value(daNm)
-	Ring nut	VEHICLE SPEED SENSOR	M18 x 1.5	5

Connect the sensor''s electrical connection.

	Name	Connector
-	Speedometer sensor	See K84 SPEEDOMETER SENSOR ( ENGINE )

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Lower the vehicle.Connect the battery negative terminal.Remove the vehicle from the lift.