3330B02 PEDAL ASSEMBLY - R R - Fiat - DOBLO - eLearn

2584645 - 3330B02 pedal assembly - r r

) Disconnect the battery negative terminal lead.1. Disconnect the clutch control cable from the engine bay.2. Disconnect the control cable on the clutch pedal.

1. Disconnect the control cable from the accelerator pedal.2. Disconnect the brake servo rod from the brake pedal; press on the side tabs of the retaining device (2a), move retaining ring (2b) back and release the rod from the pedal.3. Disconnect the brake light switch from the brake pedal.

	Name	Connector
3	Brake pedal switch	See I30 BRAKE PEDAL SWITCH ( FRONT )

1. Undo the bolt securing the steering column shaft to the pinion on the steering box; Place the lower steering column shaft to one side.

1. Undo the nuts securing the pedal unit to the body and remove.

Refitting ( Removing

) Place the pedal unit in the car and secure using the retaining nuts.

	Fastening	Component	Ø	Value(daNm)
-	Nut	PEDAL MOUNT	M8	2.8

Fit the lower steering column shaft to the steering box pinion and secure by means of a bolt.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STEERING SHAFTS	M8	3.7

Connect the brake servo rod to the brake pedal.Connect the brake light switch to the brake pedal.

	Name	Connector
-	Brake pedal switch	See I30 BRAKE PEDAL SWITCH ( FRONT )

Connect the accelerator cable to the pedal.Connect the clutch cable to the pedal.Connect the clutch cable to the lever on the gearbox. Op. 1820A14 CLUTCH PEDAL - ADJUST TRAVEL.Connect the battery negative terminal lead.