3340A30 RPM SENSOR (ONE) OF ONE L/H OR R/H FRONT WHEEL - R+R - Fiat - DOBLO - eLearn

2584685 - 3340A30 rpm sensor (one) of one l/h or r/h front wheel - r+r

) Place the car on a lift.Disconnect the battery negative terminal lead.Remove a front wheel, proceed as in the example Op. 4450B02 LEFT FRONT WHEEL - R.R..1. Undo the bolt securing the front wheel rpm sensor.2. Working in the engine bay, disconnect the rpm sensor electrical connection near the front suspension dome.

	Name	Connector
2	Left front wheel sensor for ABS	See K70 LEFT FRONT WHEEL SENSOR FOR ABS ( FRONT )

	Name	Connector
2	Right front wheel sensor for ABS	See K071 RIGHT FRONT WHEEL SENSOR FOR ABS

3. Release the electrical wiring from the brackets and remove the front rpm sensor.

Refitting ( Removing

) Fit the wheel rpm sensor and position the electrical wiring on the bracket correctly.Connect the electrical connector.

	Name	Connector
-	Left front wheel sensor for ABS	See K70 LEFT FRONT WHEEL SENSOR FOR ABS ( FRONT )

	Name	Connector
-	Right front wheel sensor for ABS	See K071 RIGHT FRONT WHEEL SENSOR FOR ABS

Screw in the rpm sensor bolt.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ABS SYSTEM FRONT WHEEL RPM SENSOR	M6	(On pillar) 0.7

Refit the front wheel, proceed as in the example Op. 4450B02 LEFT FRONT WHEEL - R.R..Connect the battery negative terminal lead.Remove the car from the lift.