2584691 - 3340B52 pump/central obs pipe - r r

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R..    Op. 3330C41 BRAKE FLUID RESEVOIR CAP - R.R. FOR VERSIONS WITH ABS.Draw off brake fluid from the reservoir using a syringe.1. Disconnect connector (1a) for the rigid pipe on the master cylinder using wrench (1b).

NameCountry
1bBox wrench for brake fittings1.856.132.000
2. Disconnect the rigid pipe connector on the ABS control unit using a 13 mm wrench.3. Remove the rigid brake pipe from master cylinder to ABS control unit.
Refitting ( Removing ) Fit a new rigid pipe.
When fitting the rigid pipe, take care not to damage or bend.
Tighten the rigid pipe fitting to the ABS control unit using a 13 mm wrench.

FasteningComponentØValue(daNm)
-ConnectorPIPE FROM PUMP TO HYDRAULIC CONTROL UNITM10 x 1(On ABS control unit) 1.4
Tighten the rigid pipe fitting to the master cylinder using a wrench.

NameCountry
-Box wrench for brake fittings1.856.132.000

FasteningComponentØValue(daNm)
-ConnectorPIPE FROM PUMP TO HYDRAULIC CONTROL UNITM10 x 1(On master cylinder) 1.4
    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R..    Op. 5530B10 BATTERY - R+R.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR.    Op. 0010T66 EXTRAS FOR VERSIONS WITH ABS FOLLOWING OPERATION 0010T65.    Op. 3330C41 BRAKE FLUID RESEVOIR CAP - R.R. FOR VERSIONS WITH ABS.