2584709 - 4110A14 STEERING WHEEL - Spoke alignment - Includes. checking and if necessary. adjusting. front wheel toe in
Position the vehicle (in running order) on a lift with suitable equipment for checking the wheel geometry.Make sure the steering wheel is perfectly straight and secure it in this position.Raise the lift. Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Loosen the bands securing the boots to the rods.1. Loosen the nuts securing the adjustable steering rods.2. Tighten or loosen the steering box rods until the toe-in value is correct, keeping the front wheels aligned.The toe-in values refer to a vehicle in standard 0 and standard A.Standard 0 = unladen vehicle including spare wheel, tools, accessories and fluids (with 5 litres of fuel).Standard A = unladen vehicle including spare wheel, tools, accessories and suppiles (full fuel tank). | Measurement | Value | |
|---|---|---|---|
| - | Front wheel toe in (mm) | - 0.86 ± 1 | |
| Standard 0 (-) | - | ||
| Measurement | Value | |
|---|---|---|---|
| - | 1a - 1b (mm) | -1 ± 1 | |
| Standard A (-) | - | ||
 | The toe-in should be measured with the tyres inflated to the correct pressure and the vehicle in running order. |
 | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | ADJUSTABLE LINK BALL JOINTS | M14 x 1.5 | (On steering box arm) 8.5 |