2584725 - 4130B21 power steering pump r r with interfering parts removed

Removing ( Refitting ) 1. Disconnect the connector for the high pressure fluid supply pipe from the power assisted steering pump to the box.Place a container under the vehicle and drain the fluid.2. Disconnect the band (2a) on the pump retaining the fluid supply pipe (2b).
1. Undo the bolts (1a) fixing the power assisted steering pump (1b) (already loosened previously) and remove it complete with mounting bracket.
1. At the bench, undo the bolts (1a) fixing the power assisted steering pump (1b) to the mounting bracket (1c).
Refitting ( Removing ) At the bench, fit the power assisted steering pump to the mounting bracket and secure it using the fixing bolts.

FasteningComponentØValue(daNm)
-BoltPOWER STEERING PUMPM8 x 1.252.2
Position the power assisted steering pump on the vehicle.Tighten the bolts fixing the power assisted steering pump mounting to the engine.

FasteningComponentØValue(daNm)
-BoltPOWER STEERING PUMP SUPPORT/BRACKETM10 x 1.255
Position the power assisted steering pump belt on the drive pulley.Fit the guard for the drive belt on the power assisted steering pump.1. Connect the fluid supply pipe (1a) from the reservoir to the power assisted steering pump and secure it using the band (1b).2. Connect the connector (2a) for the high pressure supply pipe (2b) to the steering box to the power assisted steering pump and fasten it using the bolt (2c).

FasteningComponentØValue(daNm)
2cConnectorPIPE BTWN PUMP + POWER STEERING BOXM16 x 1.54