2584786 - 4450D10 hub of one rear wheel, l/h or r/h - r+r with wheel removed

Removing ( Refitting )     Op. 3320B30 LH OR RH REAR BRAKE DRUM (ONE) - R.R.1. Remove the wheel hub cover (1a) using the tool (1b).

	Name	Country
1b	Extractor	1.847.014.000

Remove the staking from the wheel hub fixing nut.1. Undo the wheel hub fixing nut.2. Using the tool (2a), remove the wheel hub (2b), complete with bearings and inner (2c) and outer (2d) spacers.

	Name	Country
2a	Extractor	1.847.015.000

Refitting ( Removing ) Position the inner spacer, the hub complete with bearings and the outer spacer on the stub axle.Tighten a new wheel hub fixing nut.

Each time the hub fixing nut is removed, it must be replaced with a new one.

1. Tighten the rear wheel hub fixing nut to torque.

	Fastening	Component	Ø	Value(daNm)
1	Nut	REAR WHEEL HUB WITH BEARINGS	M22 x 1.5	7 + 55°

2. Stake the collar of the nut; The collar should be cut on the notch on the hub, on the side opposite that of tightening the nut, so that the safety lug prevents accidental loosening.3. Fit the hub covers (3b) using the tool (3a).

	Name	Country
3a	Drift	1.875.059.000

    Op. 3320B30 LH OR RH REAR BRAKE DRUM (ONE) - R.R.