5020A12 HEATER CASING - R+R WITH FACIA REMOVED - Fiat - DOBLO - eLearn

2584802 - 5020A12 heater casing - r+r with facia removed

) Fit a suitable container for coolant recovery.Disconnect the lower radiator pipe and drain the engine coolant into the container.After completing draining, reconnect the radiator''s bottom pipe.1. Disconnect the water delivery and return pipes to the heater box.

1. Disconnect the electrical connections.

	Name	Connector
1	Front/air conditioning - heater coupling	See D008 FRONT/AIR CONDITIONING - HEATER COUPLING

1. Undo the bolts (1a) and remove the side guards (1b) of the heater box air diffuser.

1. Remove the coin holder (1a) and the protective cap (1b) behind the handbrake lever.2. Undo the bolts (2a) and push the tunnel backwards (2b).

1. Remove the air diffuser.

1. Undo the nuts securing the heater box in the engine compartment.

1. Undo the nuts securing the heater box on the interior compartment side.

Carefully remove the heater unit.

Refitting ( Removing

) Fit the heater unit.Tighten the nuts securing the heater box, interior compartment side and engine side.Fit the air diffuser.Refit the central tunnel and secure it with the fixing bolts.Fit the side guards on the air diffuser of the heater box.Connect the electrical connection

	Name	Connector
-	Front/air conditioning - heater coupling	See D008 FRONT/AIR CONDITIONING - HEATER COUPLING

Connect the water delivery and return pipes to the heater box, and secure them with new retaining bands. Op. 1040A32 HOSE CONNECTING FUEL FILLER PIPE TO TANK - R.R. Op. 1088A30 ENGINE COOLING SYSTEM - DRAIN AND REFILL CIRCUIT WITH BLEED AIR