2584827 - 5040A54 pipe from dehydrating filter to expansion valve - r+r

Removing ( Refitting ) Place the car on a ramp.    Op. 5040A10 AIR CONDITIONING REFRIGERANT CIRCUIT - DRYING AND REPRESSURIZINGDisconnect the battery negative terminal.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.    Op. 7210E10 R.R. FRONT BUMPER    Op. 5040B14 AIR CONDITIONING SYSTEM MULTI-STAGE PRESSURE SWITCH - R+R    Op. 1044B14 MOUNTING FOR FUEL FILTER, INJECTION CONTROL UNIT AND HEATER PLUGS CONTROL UNIT - R.R. WITH INTERFERING COMPONENTS REMOVED1. Undo the fixing bolt (1a) and disconnect the pipe (1b), dehydrating filter side. 1. Undo the fixing nut (1a) and disconnect the pipe (1b), heater side. Release the pipe from the retaining bands and remove it. Refitting ( Removing ) Check that the pipe is not damaged.If it is, replace the pipe.Fit the pipe and secure it to the retaining bands.Connect the pipe to the dehydrating filter and tighten the bolt.Connect the pipe to the heater and secure it with its nut.    Op. 1044B14 MOUNTING FOR FUEL FILTER, INJECTION CONTROL UNIT AND HEATER PLUGS CONTROL UNIT - R.R. WITH INTERFERING COMPONENTS REMOVED    Op. 5040B14 AIR CONDITIONING SYSTEM MULTI-STAGE PRESSURE SWITCH - R+R    Op. 7210E10 R.R. FRONT BUMPER    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.Connect the battery negative terminal.    Op. 5040A10 AIR CONDITIONING REFRIGERANT CIRCUIT - DRYING AND REPRESSURIZINGRemove the vehicle from the ramp.