2584850 - 5040D35 air intake / recirculation flap cable - r r
Removing
(
Refitting
)
Disconnect the battery negative terminal. Op. 5580C18 AIR BAG MODULE - R+R Op. 4110A11 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECK FOR VERSIONS WITH AIR BAG Op. 7040A26 STEERING COLUMN TRIM - R+R Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG Op. 4110A31 SUPPORT WITH STEERING CONTROL SHAFTS - R.R. FOR VERSIONS WITH AIR BAG Op. 7040A60 UNDERDASHBOARD TRIM - R.R. Op. 5010C31 CENTRE AIR VENT IN DASHBOARD (ONE) LH OR RH - R.R Op. 7065C10 AIR CONDITIONING CONTROL PANEL - R+R Op. 7040L40 FRONT DOOR HOUSING RUNNING BOARD (ONE), LEFT OR RIGHT - R.R. Op. 5505A10 ELECTRICAL JUNCTION UNIT - R+R Op. 7040A10 INSTRUMENT PANEL TRIM - R.R.1. Disconnect the flexible transmission cable (1a), heater side, releasing it from the control (1b) through the slot (1c) located on the control.2. Release the flexible transmission from its retainer.
Refitting
(
Removing
)
Check the condition of the flexible cable.Connect the flexible cable to the control lever on the support and secure it with the bolt.Connect the flexible cable to the control lever on the heater and secure it to the retainer located on the heater.1. Adjust the slide control on the air intake control lever, and check that the flap is working properly, by carrying out some open/close cycles.