2584985 - 7005A14 front side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment

    Op. 5570T90 FRONT SPEAKER (ONE), LEFT OR RIGHT - R.R
Visually check that the gap between the door and front wing, and the front door and sliding side door is even.
1. Slacken the bolts (1a), door side, and (1b), bodywork side, of the door check strap (1c).
To adapt the door transversally to the door seal, carry out the operations below.1. Slacken the bolts (1a) securing the door striker (1b).
1. Slacken the bolts (1a), door side, securing the door hinge (1b).
It is advisable to work on one door hinge at a time.
On completion of adjustment, tighten the door hinge bolts to torque.

FasteningComponentØValue(daNm)
-BoltFRONT SIDE DOOR HINGESM83.2
To adjust the door in the vertical and longitudinal directions, carry out the operations described below.1. Slacken the bolts (1a), bodywork side, securing the door hinge (1b).
It is advisable to work on one door hinge at a time.
On completion of adjustment, tighten the door hinge bolts to torque.

FasteningComponentØValue(daNm)
-BoltFRONT SIDE DOOR HINGESM83.2
1. The figure shows the possible movements of the hinge for the transversal adaptation of the door to the door seal (1a), via the slotted hole (1b), for adjustment in the vertical direction (1c) and longitudinal direction (1d) through the slotted holes (1e).
At the end of each adjustment, tighten the door check strap bolts to torque.

FasteningComponentØValue(daNm)
1aBoltFRONT DOOR OPENING LIMITERM6(door) 1.2

FasteningComponentØValue(daNm)
1aBoltFRONT DOOR OPENING LIMITERM6(bodyshell) 1.2
    Op. 5570T90 FRONT SPEAKER (ONE), LEFT OR RIGHT - R.R