2585087 - 7020F22 rear swinging door exterior handle - r+r

Removing ( Refitting ) Disconnect the battery negative terminal.    Op. 7020E34 REAR DOOR FLAP INTERIOR PANEL - R+R    Op. 7020F34 REAR SWING DOOR LOCK INTERIOR MECHANISM - R+R    Op. 7020P22 MOTOR FOR REAR SWING DOOR LOCK - R.R. WITH DOOR PANEL REMOVED1. Remove the protective cap (1a) and, using an ordinary punch, undo the shear bolt (1b).
1. Remove the controls for opening/closing the door via the handle.2. Undo the bolt (2a), recover the spacer (2b) and remove the handle (2c).
Refitting ( Removing ) 1. Position the handle (1a) in its seating, and tighten the bolt (1b) after fitting the spacer (1c).2. Use a new shear bolt and tighten until the head breaks.3. Fit the plastic protection.4. Connect the rigid controls for opening/closing the door.
    Op. 7020P22 MOTOR FOR REAR SWING DOOR LOCK - R.R. WITH DOOR PANEL REMOVED    Op. 7020F34 REAR SWING DOOR LOCK INTERIOR MECHANISM - R+R    Op. 7020E34 REAR DOOR FLAP INTERIOR PANEL - R+RConnect the battery negative terminal.