2585225 - 7065A04 PRETENSIONER CONTROL UNIT - R.R.

Removing ( Refitting ) Disconnect the battery negative terminal.    Op. 7040L40 FRONT DOOR HOUSING RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040L44 REAR DOOR HOUSING RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R1. Prise out the seat belt height adjuster knob.2. Open plastic protection (2a), undo retaining nut (2b) and place front seat belt upper link (2c) to one side. 1. Undo the bolt (1a) and remove the front seat belt reel (1b) from its seating.2. Disconnect the electrical connector.

	Name	Connector
2	Driver''s seat belt pre-tensioner	See Q20 DRIVER'S SEAT BELT PRE-TENSIONER ( REAR )

	Name	Connector
2	Front passenger seat belt pre-tensioner	See Q21 FRONT PASSENGER SEAT BELT PRE-TENSIONER ( REAR )

Refitting ( Removing ) Fit the reel and tighten the bolt to torque.

	Fastening	Component	Ø	Value(daNm)
-	Side bolt	ENGINE OR ROD ANCHORAGE BEAM	M12	(Bodyshell) 10.2 ÷ 12.6

Fit the upper front seat belt link and secure to the height adjuster by tightening the nut to torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	POWER STEERNG BOX LINKS	M14	(Wheel damper side) 2.9 ÷ 3.6

Close the front seat belt upper link nut plastic protection.Fit the seat belt height adjuster knob.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R    Op. 7040L44 REAR DOOR HOUSING RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040L40 FRONT DOOR HOUSING RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.Connect the battery negative terminal.