2584694 - 3340B62 rear connection central pipe - r r

Removing ( Refitting ) Place the car on a lift.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..    Op. 5530B10 BATTERY - R+R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R..    Op. 3330C41 BRAKE FLUID RESEVOIR CAP - R.R. FOR VERSIONS WITH ABS.Draw off fluid from the reservoir using a syringe.    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R..    Op. 3340A13 A.B.S. CONTROL UNIT SUPPORT - R.R..Raise the lift.1. Undo retaining plugs (1a) and remove brake pipe protection (1b) on the lower part of the car.2. Undo connection (2a) securing the rigid pipe to the rear brakes using wrench (2b) and release the pipe from clips (2c) retaining it to the body.

NameCountry
2bBox wrench for brake fittings1.856.132.000
Lower the lift.1. Release the pipe from the retaining brackets on the bulkhead between engine bay and passenger compartment, then remove the pipe.
Refitting ( Removing ) Fit a new rigid pipe.
When positioning the rigid pipe, take care not to damage or bend.
Screw the connector onto the rear brake pipes and tighten. Then secure the rigid pipe to the support bracket.

NameCountry
-Box wrench for brake fittings1.856.132.000

FasteningComponentØValue(daNm)
-ConnectorRIGID BRAKING PIPE-CONT.UNIT/REAR BRAKESM10 x 11.4
Lower the lift.    Op. 3340A13 A.B.S. CONTROL UNIT SUPPORT - R.R..    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R..    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R..    Op. 5530B10 BATTERY - R+R.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR.    Op. 0010T66 EXTRAS FOR VERSIONS WITH ABS FOLLOWING OPERATION 0010T65.    Op. 3330C41 BRAKE FLUID RESEVOIR CAP - R.R. FOR VERSIONS WITH ABS.    Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R..Remove the car from the lift.