5505A10 ELECTRICAL JUNCTION UNIT - R+R - Fiat - DOBLO - eLearn

2584873 - 5505A10 electrical junction unit - r+r

) Disconnect the battery negative terminal.1. Open the protective flap.

1. Disconnect the front junction unit electrical connectors.

	Name	Connector
1a	Junction unit under dashboard	See B002 JUNCTION UNIT UNDER DASHBOARD

1. Undo the bolts fixing the junction unit.2. Release the retaining springs (2a) on both sides and separate the junction unit (2b) from the body computer (2c).3. Disconnect the rear electrical connectors and remove the junction unit.

	Name	Connector
3	Junction unit under dashboard	See B002 JUNCTION UNIT UNDER DASHBOARD

Refitting ( Removing

) Connect the rear electrical connectors.

	Name	Connector
-	Junction unit under dashboard	See B002 JUNCTION UNIT UNDER DASHBOARD

Connect the junction unit to the body computer, checking that the side retaining springs are correctly fastened.Tighten the bolts fixing the junction unit.Connect the front control unit electrical connectors and close the protective flap.Connect the battery negative terminal.