2585092 - 7020N20 LOCK/MOTOR ASSEMBLY (one) for central locking on sliding side door, left or right - RR..

Removing ( Refitting ) Disconnect the battery negative terminal.    Op. 7020D18 EXTERIOR HANDLE WITH LOCK BARREL - R+R    Op. 7020D68 TRIM FOR LOCK IDLER FOR ONE SLIDING SIDE DOOR, LEFT OR RIGHT - R.R.    Op. 7020C30 SLIDING DOOR INTERIOR PANEL LEFT OR RIGHT - R+R    Op. 7020D34 SLIDING DOOR INTERIOR HANDLE LEFT OR RIGHT - R+R1. Disconnect the central locking electrical connector.

	Name	Connector
1	Left rear door lock geared motor	See N55 LEFT REAR DOOR LOCK GEARED MOTOR

	Name	Connector
1	Right rear door lock geared motor	See N56 RIGHT REAR DOOR LOCK GEARED MOTOR ( RIGHT DOOR )

2. Undo the fixing bolts (2a) and remove the lock gearmotor (2b) from its seating, complete with flexible control cables. 1. Open the safety clips (1a) and disconnect the flexible control cables (1b) for opening/closing the door via the outer handle. 1. Prise off and remove the flexible cable for opening/closing the door from the inner handle. Refitting ( Removing ) Check that the flexible cables for opening/closing the door from the outer and inner handle are not damaged.Fit, in their seatings, the flexible control cables for opening/closing the door.Fit the door lock gearmotor complete with flexible control cables, and secure it with the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	SLIDING./ SIDE DOOR LOCK. MOTOR ASSEMBLY .	M8	1.6

Connect the central locking electrical connector.

	Name	Connector
-	Left rear door lock geared motor	See N55 LEFT REAR DOOR LOCK GEARED MOTOR

	Name	Connector
-	Right rear door lock geared motor	See N56 RIGHT REAR DOOR LOCK GEARED MOTOR ( RIGHT DOOR )

    Op. 7020D34 SLIDING DOOR INTERIOR HANDLE LEFT OR RIGHT - R+R    Op. 7020C30 SLIDING DOOR INTERIOR PANEL LEFT OR RIGHT - R+R    Op. 7020D68 TRIM FOR LOCK IDLER FOR ONE SLIDING SIDE DOOR, LEFT OR RIGHT - R.R.    Op. 7020D18 EXTERIOR HANDLE WITH LOCK BARREL - R+RConnect the battery negative terminal.