244000462 - I05 DIPPED HEADLAMPS NOT WORKING

When the stalk switch wheel is operated with the key ON, the dipped beams do not work

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	INDIVIDUAL BULB CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the condition of the bulbs and associated bulb holder	Move on to Step	1. Bulbs damaged	1. Change bulbs    Op. 5540B25 DIPPED HEADLAMP BEAM (1), LH OR RH - R R
			2. Front light cluster fault	2. Repair or replace front light cluster    Op. 5540B10 EXTERIOR LIGHT DIMMER RESISTOR - R+R
2	DIPPED HEADLAMP ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Dipped headlamp fuses Connections between battery, engine bay control unit, dipped beam relay and bulbs; Bulb earth	Move on to Step	1. Component defective	1. Replace defective component (in the case of a fuse, find out what caused it to blow).
			2. Connections interrupted	2. Repair the connections    See E2011 DIPPED HEADLAMPS
3	DIPPED HEADLAMP ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Connections between battery, ignition switch, engine bay control unit, dipped beam relay, switch control unit and stalk unit; Stalk unit earth;	Move on to Step	1. Component defective	1. Replace defective component (in the case of a fuse, find out what caused it to blow).
			2. Connections interrupted	2. Repair the connections    See E2011 DIPPED HEADLAMPS
4	STEERING COLUMN SWITCH UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the stalk unit is working properly: particularly the dipped beam selector    See E2011 DIPPED HEADLAMPS	Move on to Step	Stalk unit not working properly	Replace the steering column switch unit    Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG
5	DIPPED BEAM RELAY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the dipped beam relay is working properly    See E2011 DIPPED HEADLAMPS	Move on to Step	Dipped beam relay not working properly	Change the dipped beam relay    Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG
6	IGNITION SWITCH CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the ignition switch is operating correctly: particularly the dipped beam relay supply    See E2011 DIPPED HEADLAMPS	Move on to Step	Ignition switch fault	Repair or replace the ignition switch    Op. 5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG
7	SWITCH CONTROL UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Correct power supply to switch control unit Check that when an earth signal is activated from the stalk unit to the switch control unit, an earth signal leaves the switch control unit to control the dipped beam relay	Move on to Step	1. Connections interrupted	1. Repair the connections    See E2011 DIPPED HEADLAMPS
			2. Switch control unit fault	2. Replace switch control unit
8	ENGINE BAY CONTROL UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Correct power supply to engine bay control unit; Check that when an earth signal is activated from the switch control unit to the engine bay control unit, a battery voltage output is generated to control the bulbs.	Move on to Step	1. Connections interrupted	1. Repair the connections    See E2011 DIPPED HEADLAMPS
			2. Engine bay control unit fault	2. Change engine bay control
9	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present