244000465 - I08 SIDE LIGHTS NOT WORKING

when the stalk switch wheel is operated with the key ON, the main beams do not work

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	INDIVIDUAL BULB CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the condition of the bulbs and associated bulb holder;	Move on to Step	1. Front bulbs damaged	1. Change the bulbs
			2. Rear bulbs damaged	2. Change the bulbs
			3. Tail-light fault	3. Repair or change the tail-light
			4. Front light cluster fault	4. Repair or replace front light cluster
2	SIDE LIGHT ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: side light fuses; connections between battery, engine bay control unit, ignition switch, stalk unit and underfacia junction unit; connections between underfacia junction unit and bulbs; bulb earth	Move on to Step	1. Component defective	1. Replace defective component (in the case of a fuse, find out what caused it to blow).
			2. Connections interrupted	2. Repair the connections    See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
3	STEERING COLUMN SWITCH UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that a battery voltage output is generated to supply the side lights when the stalk switch wheel is operated with the key on.	Move on to Step	Stalk unit not working properly	Replace the steering column switch unit    See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
4	IGNITION SWITCH CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that a battery voltage is generated when the ignition key is turned on and more specifically to the stalk switch that supplies the side lights    See E2010 SIDE LIGHTS / NO. PLATE LIGHTS	Move on to Step	Ignition switch fault	Repair or replace the ignition switch    Op. 5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG
5	UNDERFACIA JUNCTION UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that a battery voltage output is generated from the underfacia junction unit to activate the bulbs when the stalk switch wheel is operated with the key on    See E2010 SIDE LIGHTS / NO. PLATE LIGHTS	Move on to Step	Underfacia junction unit fault	Repair or change the underfacia junction unit
6	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present