244000471 - I20 FOG LIGHTS NOT WORKING

The fog light does not work when the button on the relevant switch unit is operated with the key ON and the side lights - dipped beams on.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	INDIVIDUAL LIGHT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the condition of the bulbs and associated bulb holder;	Move on to Step	1. Bulbs damaged	1. Change the bulbs    Op. 5540D14 L/H OR R/H FOG LAMP BULB (ONE) - R+R
			2.Front light cluster fault	2. Repair or change the front light cluster    Op. 5540D13 RIGHT FOG LIGHT - R.R.
2	FOG LIGHT ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Fog light fuses; Connections between battery, engine bay control unit, fog light relay and bulbs; Bulb earth	Move on to Step	1. Component defective	1. Replace defective component (in the case of a fuse, find out what caused it to blow).
			2. Connections interrupted	2. Repair the connections    See E2030 FOG LIGHTS
3	FOG LIGHT ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Connections between battery, ignition switch, facia control unit, engine bay control unit, fog light relay and switch control unit Connections between stalk unit and switch control unit	Move on to Step	1. Component defective	1. Replace defective component (in the case of a fuse, find out what caused it to blow).
			2. Connections interrupted	2. Repair the connections    See E2030 FOG LIGHTS
4	STEERING COLUMN SWITCH UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the stalk unit is working properly: particularly the side light activation data output    See E2030 FOG LIGHTS	Move on to Step	Stalk unit not working properly	Replace the steering column switch unit    Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG
5	FOG LIGHT RELAY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the fog light relay is working properly    See E2030 FOG LIGHTS	Move on to Step	Fog light relay not working properly	Change the dipped beam relay    Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG
6	IGNITION SWITCH CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the ignition switch is operating correctly: particularly the fog lamp relay power supply    See E2030 FOG LIGHTS	Move on to Step	Ignition switch fault	Repair or replace the ignition switch    Op. 5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG
7	SWITCH CONTROL UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Correct power supply to switch control unit Check that side light activation output data is present when the stalk switch wheel is turned Check that an earth signal is generated to control the fog light relay when the fog light button is activated	Move on to Step	1. Connections interrupted	1. Repair the connections    See E2030 FOG LIGHTS
			2. Switch control unit fault	2. Change the switch control unit
8	ENGINE BAY CONTROL UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Correct power supply to the engine bay control unit; Check that an earth signal is generated to control the dipped beam relay when the fog light button is activated	Move on to Step	1. Connections interrupted	1. Repair the connections    See E2030 FOG LIGHTS
			2. Engine bay control unit fault	2. Change the engine bay control unit    Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R
9	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present