244000485 - J03 SCREEN WASHER NOT WORKING

The screen washer does not work when the steering column switch unit lever is operated with the ignition on.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
0	PRELIMINARY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check:    See E3020 WINDSCREEN WASH/WIPE the condition of the fuses The level of the washer fluid	Move on to Step	1. Fuse/s blown	1. Replace fuse/s and find out what could have caused them to blow
			2. Fluid level too low	2. Add fluid, checking for possible leaks
1	STEERING COLUMN SWITCH UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Correct stalk unit power supply/earths Check that an operational output voltage to the electric pump motor is present when the stalk switch is operated	Move on to Step	1. Power supplies/earths incorrect	1. Restore correct power supplies/earths    See E3022 HEADLAMP WASHER
			2. Stalk unit not working properly	2. Replace the steering column switch unit    Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG
2	ELECTRIC PUMP MOTOR CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the operation of the electric pump motor    See E3022 HEADLAMP WASHER	Move on to Step	Motor defective	Replace the motor
3	SCREEN WASHER ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the following, in order: Connections between battery and engine bay junction unit Connections between engine bay junction unit and underfacia junction unit Connections between battery, ignition switch and underfacia junction unit Connections between underfacia junction unit and steering column switch unit Connections between steering column switch unit and electric pump motor Stalk unit earth Electric pump motor earth	Move on to Step	Connections interrupted	Repair the connections    See E3022 HEADLAMP WASHER
4	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present