244000497 - K60 ABS FAILURE WARNING LIGHT ON

The warning light comes on and stays on with the key on.
STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Connect the diagnostic test equipment to the tester input.Check:

  • that there are no faults in the ABS control unit;
  • the plausibility of all the parameters
Move on to Step1. Error detected in the control unit1. Continue following the instructions for the diagnostic equipment
2. No communication with the control unit2. Restore the connection between the ABS control unit and the diagnostic connector    See E4010 INSTRUMENT PANEL
2INSTRUMENT PANEL SUPPLY CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the connection between ABS control unt and instrument panel    See E4010 INSTRUMENT PANELMove on to Step1. Connections not correct1. Repair the connections
2. Instrument panel inefficient2. Replace instrument panel    Op. 5560B10 ANALOGUE CONTROL PANEL - R+R
3CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present