244000498 - K61 ABS WARNING LIGHT OFF / (DO NOT CARRY OUT INITIAL TEST)

The ABS warning light does not come on at key on (it should come on for 3 seconds to indicate that the initial control unit test has been carried out, and then go off)

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic test equipment (Examiner or other instruments) to the tester input.Check that the tester is in proper communication with the ABS control unit	Move on to Step	1. No communication with the control unit	1. Restore: connection between the ABS control unit and the diagnostic connector; ABS control unit supply     See E7020 ABS
			2. Error detected in the control unit	2. Continue following the instructions for the diagnostic equipment
			3. ABS control unit faulty	3. Change the ABS control unit
2	INSTRUMENT PANEL CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the condition of the ABS warning light in the instrument panel    See E4010 INSTRUMENT PANEL	Move on to Step	Instrument panel not working	Replace instrument panel    Op. 5560B10 ANALOGUE CONTROL PANEL - R+R