1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE - Fiat - DUCATO - eLearn

244000633 - 1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE

) - Position the vehicle on the lift.1. Open the bands securing the hose to the filter and to the air intake.2. Release and remove the cold air intake hose from the engine compartment.

See in Op. 1048A10 Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle and position a hydraulic arm support beneath the gearbox to support the engine.1. Loosen the bolts (1a), undo the bolts (1b) and remove the air filter mounting bracket (1c).

1. Undo the nuts fixing the gearbox side flexible mounting to the rigid support.2. Undo the nuts securing the flexible block to the body.3. Remove the gearbox side power unit flexible mount.

Refitting ( Removing

) - Fit the gearbox side rigid engine support.- Tighten the nuts fixing the gearbox side flexible mounting to the rigid support.

	Value - daNm	Fastening	Component	Ø
.	(Rigid mount) 5	Nuts	GEARBOX SIDE RUBBER MOUNT	M10

- Tighten the nuts securing the flexible block to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	(body) 5	Nut	GEARBOX SIDE RUBBER MOUNT	M10X1.5

- Remove the hydraulic arm positioned previously to support the gearbox. See in Op. 1048A10 Op. 7055B54 UNDER-ENGINE GUARD - R R- Fit the filter mounting bracket and tighten the fixing bolts.- Fit the cold air intake hose and connect it to the air filter casing and to the air intake on the crossmember and restore the securing bands.- Remove the vehicle from the lift.