244000701 - 1032B47 TOOTHED DRIVE PULLEY - R R FOR VERSIONS WITH AIR CONDITIONER

Removing ( Refitting )     Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R See in Op. 1092A12 See in Op. 1032D12 See in Op. 1032B14 See in Op. 1032B44 Refitting ( Removing ) See in Op. 1032B44 See in Op. 1032B14 See in Op. 1032D12 See in Op. 1092A12    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R    Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER    Op. 7055B54 UNDER-ENGINE GUARD - R R Removing ( Refitting ) - Disconnect the negative battery terminal.    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1008B10 See in Op. 1032D12 See in Op. 1032B14    Op. 1020D10 FRONT CRANK SHAFT OIL SEAL COVER - R + R AND REPLACE SEALS WITH TIMING BELT REMOVED1. Make two millings on the toothed drive pulley (1a) and remove the pulley using a suitable extractor (1b). Refitting ( Removing ) - Place the toothed drive pulley in the oven.1. Fit the drive pulley ensuring that the groove (1a) coincides with the key (1b). - Take the pulley out of the oven using suitable pliers and fit it on the crankshaft with the help of a drift.

do not exceed 350°C.

    Op. 1020D10 FRONT CRANK SHAFT OIL SEAL COVER - R + R AND REPLACE SEALS WITH TIMING BELT REMOVED See in Op. 1032B14 See in Op. 1032D12 See in Op. 1008B10    Op. 7055B54 UNDER-ENGINE GUARD - R R