244000716 - 1036B10 OVERHEAD CAMSHAFT - R R ON VEHICLE
Removing
(
Refitting
)
See in Op. 1048A21 Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R Op. 5510C10 IGNITION COIL/S - R+R Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1088C30 Op. 1048A31 RIGID PIPE CONNECTING AIR CLEANER TO INLET MANIFOLD RIGID PIPE R R See in Op. 1016A20 Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R See in Op. 1092A12 See in Op. 1032D12 See in Op. 1032B14 Op. 1032B53 DRIVEN TOOTHED PULLEY (ONE) - R R FOR VERSIONS WITH AIR CONDITIONER1. Remove the lubrication pipe (1a) which is a press fit and the seals (1b).
 | Mark each camshaft cap so they can be fitted correctly. |
Refitting
(
Removing
)
1. Fit the camshaft.2. Fit the camshaft caps (2a) and tighten the nuts (2b) to the recommended torque following the order given. | Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| 2b | 1,6 | Nut | CAMSHAFT CAPS | - |
Removing
(
Refitting
)
See in Op. 1016A10 See in Op. 1016A20 Op. 4450B04 RIGHT FRONT WHEEL R R Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 1092D10 AIR CONDITIONER COMPRESSOR DRIVE BELT - R + R Op. 1092B51 ALTERNATO/WATER PUMP DRIVE BELT - R+R FOR VERSIONS WITH AIR CONDITIONER See in Op. 1092A12 See in Op. 1008B10 See in Op. 1032D12 See in Op. 1032B14 Op. 1032B61 TIMING BELT PULLEY - R R See in Op. 1036B361. Undo the fixing nuts (1a) and remove the camshaft caps (1b).3. Remove the camshaft.
Refitting
(
Removing
)
- Fit the camshaft in the cylinder head.- Tighten the bolts fixing the caps.- Tighten the nuts fixing the caps to torque. | Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| 1 | 1,8 | Nut | CAMSHAFT CAPS | M8 |
| follow the progressive numbering of the camshaft caps (1 = timing side pulley) and position the caps so that the numbers stamped on them are legible from the injector side. |
