244000758 - 1042A21 CNG CANISTER MOUNTING BRACKET - R.R.
Removing
(
Refitting
)
Position the vehicle on the lift. Op. 1042E60 CNG CYLINDER UNIT PROTECTION SEAL - R R1. Undo the threaded spacer (1a) and the nut (1b) underneath.2. Remove the canister mounting bracket. | Proceed in the same way for the other brackets. If the brackets are all being removed together, the instructions in the cycle for removing CNG canisters must be followed. |
Refitting
(
Removing
)
Fit the CNG canister mounting bracket and tighten the nut.1. Tighten the fixing nuts (1a) and (1b) to torque and then the spacers securing the CNG canister brackets.| Value daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 1a | 4 | Nut | - | M12 |
| Value daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 1b | 8 | Nut | - | M12 |
