1042A50 PIPE (1) CONNECTING CNG RECHARGING SYSTEM SOLENOIDS - R R - Fiat - DUCATO - eLearn

244000766 - 1042A50 PIPE (1) CONNECTING CNG RECHARGING SYSTEM SOLENOIDS - R R

) Position the vehicle on the lift.Proceed with draining the high pressure circuit following the instructions in the specific operation: Op. 1042A02 METHANE SYSTEM SAFETY SET UP Op. 1042E60 CNG CYLINDER UNIT PROTECTION SEAL - R RDisconnect the electrical connections for the cut out solenoid valves on the canisters.1. Undo the connectors from the solenoid valves on the canister.2. Remove the CNG solenoid valve connecting pipe.

Proceed in the same way for the removal of the other pipes.

Refitting ( Removing

) Fit the CNG solenoid valve connecting pipe and tighten the connectors on the canister solenoid valves.

	Value daNm	Fastening	Component	Ø
-	2.8	Connector	-	-

Connect the electrical connections for the cut out solenoid valves on the canisters.Move the CNG cut-off solenoids to open position by hand and check system is efficient. Op. 1042E60 CNG CYLINDER UNIT PROTECTION SEAL - R RRemove the vehicle from the lift.