Removing
(
Refitting
)
Disconnect the negative battery terminal.Close the manual methane cut-off valves on the cylinder unit.1. Disconnect the electrical connection frrom the pressure sensor.
Description
Connector
1
Methane pressure sensor
K054
2. Undo the pressure sensor from the pressure reduction unit and remove.
Refitting
(
Removing
)
Fit the CNG pressure sensor and tighten.Connect the CNG pressure sensor electrical connector.
Description
Connector
-
Methane pressure sensor
K054
Move the CNG cut-off solenoids to open position by hand and check system is efficient.Connect the negative battery terminal.
Removing
(
Refitting
)
Disconnect the negative battery terminal.Close the manual methane cut-off valves on the cylinder unit.
1. Disconnect the electrical connection frrom the pressure sensor.