1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONER - Fiat - DUCATO - eLearn - 4CarData

244000981 - 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONER

Removing ( Refitting

) - Position the vehicle on a lift. Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R- Disconnect the electrical connection for the rpm sensor.1. Undo the retaining bolt.2. Remove the rpm sensor.

1. Fit the flywheel lock in the housing for the rpm sensor.

	Description	Code	Function
1	Counter-torque	1.870.765.000	Flywheel lock

1. Undo the retaining bolt.2. Remove the auxiliary shaft drive pulley (1b).

Refitting ( Removing

) - Fit the auxiliary shaft drive pulley and tighten the fixing bolt to torque using the angular tightening tool.

	Value - daNm	Fastening	Component	Ø
.	4+51°	Bolt	CRANKSHAFT PULLEY	-

	Description	Code	Function
.	Torque wrench	1.860.942.000	Angular tightening

- Remove the flywheel lock fitted previously.

	Description	Code	Function
.	Counter-torque	1.870.765.000	Flywheel lock

- Fit the rpm sensor in the housing on the bellhousing and tighten the fixing bolt.- Connect the electrical connection for the rpm sensor. Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER Op. 4450B04 RIGHT FRONT WHEEL R R Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.