244001166 - 4130A10 POWER STEERING BOX - R+R - CHECK TOW-IN IF NECESSARY SEPARATELY - INCLUDES BLEEDING

Removing ( Refitting ) - Disconnect the negative battery terminal.    Op. 7055B54 UNDER-ENGINE GUARD - R R - Position a suitable container for collecting the power assisted steering fluid from the steering box.1. Undo the connectors on the steering box (1a) and disconnect the two pipes (1b) connected to it.
1. Undo the bolt fixing the lower shaft to the power assisted steering box pinion.
1. Undo the nut fixing the track rod end to the steering knuckle.2. Extract the track rod end (2b) from the housing in the steering knuckle using the tool (2a).
DescriptionCodeFunction
2aHead extractor1.847.038.000Ball joint removal
Carry out the same operation on the other track rod end using the same tool.
1. Undo the bolts securing the power assisted steering box to the crossmember.
1. Undo the fixing nut and disconnect the connecting rod for the anti-roll bar from the track control arm.2. Loosen the nut fixing the anti-roll bar in order to be able to move it outside of the working area.
1. Remove the power assisted steering box from the timing side wheel arch.
Refitting ( Removing ) - Fit the power assisted steering box in the timing side wheel arch.- Tighten the nut fixing the anti-roll bar.
Value - daNmFasteningComponentØ  
.5,6NutFRONT ANTI-ROLL BAR JOINTSM12
- Tighten the nut fixing the anti-roll bar connecting rod to the track control arm.
Value - daNmFasteningComponentØ  
.8NutFRONT ANTI-ROLL BAR SUPPORTSM12
- Tighten the bolts securing the power assisted steering box to the crossmember to torque.
Value - daNmFasteningComponentØ  
.11BoltsPOWER STEERING BOXM12
- Reposition the track rod ends in the housings in the steering knuckle and tighten the fixing nuts to torque.
Value - daNmFasteningComponentØ  
.6.9NutADJUSTABLE LINK BALL JOINTSM16
- Tighten the nut fixing the lower shaft to the power assisted steering box pinion to torque.
Value - daNmFasteningComponentØ  
.2,5BoltFIXED ELEMENTS STEERING SHAFT STEERINGM8
- Connect the fluid pipes to the steering box and tighten the connectors to torque.
Value - daNmFasteningComponentØ  
.5,5NutPIPE BTWN PUMP + POWER STEERING BOXM16
Value - daNmFasteningComponentØ  
.6,3NutRETURN PIPE TO POWER STEERING RESERVOIRM18
- Refill the power assisted steering system using the appropriate fluid.
DescriptionQty.ComponentTypeClassification
.TUTELA GI/A1.3 litriPOWER ASSISTED STEERING CIRCUITOilATF DEXRON 2 D LEV SAE 10 W
    Op. 7055B54 UNDER-ENGINE GUARD - R R- Connect the negative battery terminal. See in Op. 1008C32 See in Op. 1008C32