Removing
(
Refitting
)
Drain the section of the pipe from the LPG filler to the tank, following the instructions in the procedure: Op. 1043A02 LPG SYSTEM LINES PIPE DRAINING OPERATIONSPosition the vehicle on the lift.Disconnect the negative battery terminal.1. Working from inside the load carrying compartment, release the retaining buttons (1a) and remove the left side trim (1b).
1. Loosen the retaining bands.2. Release the corrugated pipe protecting the LPG filler pipe.
1. Undo the connector for the LPG filler pipe from the filler.
1. Undo and remove the LPG filler pipe cap.2. Undo the retaining bolts (2a) and remove the LPG filler (2b).
Refitting
(
Removing
)
Position the LPG filler in the housing and tighten the fixing bolts.Working from inside the load carrying compartment, tighten the connector for the LPG filler pipe to the filler to the recommended torque.
Value daNm
Fastening
Component
Ø
-
4
Connector
M20 X 1
Position the corrugated pipe protecting the LPG filler pipe and tighten the retaining bands.Tighten the LPG filler cap. Op. 1043A04 GPL SYSTEM AND PIPES CHECK FOR LEAKSPosition the load carrying compartment left side trim using retaining buttons.Connect the negative battery terminal.
Removing
(
Refitting
)
Drain the section of the pipe from the LPG filler to the tank, following the instructions in the procedure: Op. 1043A02 LPG SYSTEM LINES PIPE DRAINING OPERATIONSPosition the vehicle on the lift.Disconnect the negative battery terminal.1. Working from inside the load carrying compartment, release the retaining buttons (1a) and remove the left side trim (1b).
