244000763 - 1042A42 CNG RECHARGING PIPE FROM SLEEVE TO 3-WAY FITTING - R R
Removing
(
Refitting
)
Position the vehicle on the lift.Proceed with draining the high pressure circuit following the instructions in the specific operation: Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Release the safety pipe.2. Undo the connector from the hose.
1. Undo the connector on the single acting valve.2. Undo the retaining bolts.3. Remove the CNG repressurizing pipe from the three-way coupling hose.
Refitting
(
Removing
)
Fit the CNG repressurizing pipe and tighten the connector to the single-acting valve.
Value daNm
Fastening
Component
Ø
-
2.8
Connector
-
-
Tighten the three bolts fixing the CNG repressurizing pipe.Tighten the connector and reposition the safety pipe.
Value daNm
Fastening
Component
Ø
-
2.8
Connector
-
-
Move the CNG cut-off solenoids to open position by hand and check system is efficient.Remove the vehicle from the lift.
Removing
(
Refitting
)
Position the vehicle on the lift.Proceed with draining the high pressure circuit following the instructions in the specific operation: Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Release the safety pipe.2. Undo the connector from the hose.
