244000765 - 1042A46 CNG RECHARGING SYSTEM 3-WAY FITTING (1)-R R
Removing
(
Refitting
)
Position the vehicle on the lift.Proceed with draining the high pressure circuit following the instructions in the specific operation: Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Undo the connector for the pressure reduction unit supply pipe.2. Undo the connector for the canister pipe.3. Undo the connector (3a) and the single-acting valve (3b).4. Remove the CNG system three-way connector.
Refitting
(
Removing
)
Fit the CNG system three-way connector.Tighten the single-acting valve and the connector. Tighten the connector for the CNG canisters.
Value daNm
Fastening
Component
Ø
-
2.8
Connector
-
-
Tighten the connector for the pipe to the pressure reduction unit.
Value daNm
Fastening
Component
Ø
-
2.8
Connector
-
-
Move the CNG cut-off solenoids to open position by hand and check system is efficient.Remove the vehicle from the lift.
Removing
(
Refitting
)
Position the vehicle on the lift.Proceed with draining the high pressure circuit following the instructions in the specific operation: Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Undo the connector for the pressure reduction unit supply pipe.2. Undo the connector for the canister pipe.3. Undo the connector (3a) and the single-acting valve (3b).4. Remove the CNG system three-way connector.