244000778 - 1044E90 CABLE LOOM FOR CNG CANISTER SOLENOID VALVES - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.- Position the vehicle on the lift.1. Disconnect the electrical connection for the engine bay methane wiring loom coupling. - Secure the end of the wiring to a probe.    Op. 1042E60 CNG CYLINDER UNIT PROTECTION SEAL - R R1. Undo the retaining nuts.2. Remove the fastening studs.3. Remove vertical guard from its seat. 1. Disconnect the electrical connections of the cut-off solenoids on the cylinders.- Release the electrical wiring from the fastenings on the body and remove. Refitting ( Removing ) - Fit the electrical wiring and connect the electrical connections to the cut-off solenoids.- Secure the electrical wiring to the body.- Move the electrical wiring to the engine bay and connect the engine bay methane wiring loom coupling electrical connection.- Position the vertical guard and secure with nuts.- Fit the studs to the guard.    Op. 1042E60 CNG CYLINDER UNIT PROTECTION SEAL - R R- Remove the vehicle from the lift.- Connect the negative battery terminal.